C
OUGAR
3
V
IDEO
R
OUTER
Publication 81-9059-0660-0, Rev. B
March 2011
Proprietary Information of PESA
5-21
•
Refresh Panel Status – Clicking this button causes the GUI application to re-poll the status of all
remote control panels.
5.12.4
S
ALVO
S
TATUS
The Salvo Status screen, Figure 5-18, displays the current status of all salvo groups in the router system.
FIGURE 5-18 SALVO STATUS DISPLAY
Selecting an entry in the Salvo Groups listing displays the destinations and sources, by switching level,
contained in the salvo group. You may immediately “take” the salvo group by clicking the Fire Salvo
button.
5.12.5
A
CTIVE
/S
TANDBY
For both the Primary and Redundant SSC3 controller in the frame, the Active/Standby status screen,
Figure 5-19, displays the IP address and current operating mode. If the router is not equipped with a
redundant controller module, the IP address of the primary module is displayed and the mode box
indicates that the module is the single controller for the router. If the router contains a redundant
controller, the active or standby status of each module is displayed along with a pair of radio buttons
that allow you to swap the active controller. You may use either Set Mode button set to initiate the
status toggle. A pop-up prompts you to verify the action before the status toggle is implemented.
Summary of Contents for Cougar 3
Page 88: ......
