Pagina 45 di 53
7.8) TELEPHONE PROGRAMMER OPERATION
Absence temperature t3 can be deselected permanently
(see paragraph 6.5).
The controls to open and close contacts are effective within 1 minute.
See instructions in the telephone programmer to open and close the contact.
Telephone programmer
Chronothermostat operation
Closed contact
in permanent manual mode
with
temperature
t1 Comfort
Open contact
in permanent manual mode
with
temperature
t3 Absence
7 - USER FUNCTIONS SETTINGS
The telephone programmer allows you to control the chronothermostat from a
distance via the contact connected to terminals
and
(see paragraph 4.5).
8
9
Closing the contact
: when operating with programs, temporary/permanent manual
or P 04 Holiday program, the chronothermostat is in
with
permanent manual mode
t1 Comfort
temperature. The blinking symbols
and fixed “
” appear on the
display to indicate forcing (fig. 61).
You can return to the previously set program (
÷
) by pressing “
”. The
P 01
P 03
fixed signal
will appear on the display so as to indicate that the contact of the
programmer is still closed. This can be opened at a later stage (fig. 62).
Opening the contact
: the chronothermostat is in
permanent manual operation
with
temperature (example in fig. 63).
t3 Absence
The blinking symbols
and fixed “
” appear on the display to indicate forcing.
Press “
” on the chronothermostat to return to program operation.
fig. 62
0
8
10 12 14 16 18
2
4
6
20 22
t1
t2
t3
.
.
.
fig. 61
0
8
10 12 14 16 18
2
4
6
20 22
t1
t2
t3
.
.
.
fig. 63
0
8
10 12 14 16 18
2
4
6
20 22
t1
t2
t3
.
.
.
e.g. telephone programmer
Contact
0
8
10 12 14 16 18
2
4
6
20 22
t1
t2
t3
.
.
.
88
EN
7.9) USEFUL INFORMATION DISPLAYS
7 - USER FUNCTIONS SETTINGS
Quickly press to view (sequentially) useful information regarding system and
chronothermostat operation.
•
From the previous screen press
again: the display will show the battery charge
level (example in fig. 65).
Batteries completely flat
Batteries flat (in this case, the symbol will blink)(example in fig. 66)
replace batteries within 30 days.
It is possible to return to the normal program by waiting out the time out (3
minutes) or else by pressing
.
OK
•
Press
once: the display will show the radio protocol version, the installed firmware
version and any revision. (example in fig. 64).
7.9.2) BATTERY CHARGE STATUS
7.9.1) VIEWING THE PROTOCOL TYPE AND FIRMWARE VERSION
It is possible to return to the normal program by waiting out the time out (3 minutes)
or else by pressing
.
OK
This parameter is required in case of requests for technical assistance.
fig. 64
0
8
10 12 14 16 18
2
4
6
t1
t2
t3
20 22
.
fig. 65
0
8
10 12 14 16 18
2
4
6
t1
t2
t3
20 22
fig. 66
0
8
10 12 14 16 18
2
4
6
t1
t2
t3
20 22
.
.
.
Firmware Version
Any Firmware revision
Protocol
89
EN
Summary of Contents for 1TXCRTX05
Page 52: ...Pagina 52 di 53...
