Pagina 39 di 53
•
•
6 - SPECIAL FUNCTIONS SETTINGS
6.1/b) UNBLOCKING THE TEMPERATURE LIMITS
It is possible to transfer programming data from the chronothermostat to another
equal one.
To start the transferring procedure, simultaneously press the
and
Clone
Test for 4
seconds
Send set
keys.
will appear on the display. The chronothermostat will
remain in this condition for 15 seconds, after which, if no further requests are
received, it will return to the last viewed program.
•
6.2) PROGRAMMING DATA TRANSFER BETWEEN TWO
CHRONOTHERMOSTATS
•
Press the set temperature key to be unblocked (
or
). The selected symbol (
or
t1
t2
t1
t2
), the relative value to the side and the central digits will blink (example in fig. 32).
Press
and the key that corresponds to the selected value (
or
)
OK
t1
t2
simultaneously within 8 seconds. Once confirmation is given for unblocking, the
temperature digits will stop blinking (example in fig. 33).
After a few seconds, the chronothermostat will return to the set program.
•
This function can be protected by a password (see chapter ).
8
•
The other chronothermostat must be met in a condition of reception within 15
seconds.
fig. 32
0
8
10 12 14 16 18
2
4
6
.
.
.
t1
t2
t3
20 22
fig. 34
0
8
10 12 14 16 18
2
4
6
t1
t2
t3
20 22
press simultaneously
press simultaneously for 4 seconds
fig. 33
0
8
10 12 14 16 18
2
4
6
.
.
.
t1
t2
t3
20 22
76
EN
6 - SPECIAL FUNCTIONS SETTINGS
•
•
On the reception chronothermostat, press the
key for 4 seconds.
will appear on the display. The symbol
will switch on
Clone
COPY SET
for 1 second to indicate sending the connection request (example in fig. 35).
As soon as the transmission chronothermostat receives the request, it will start to send data. The symbol
will switch on.
If within 5 seconds, the reception chronothermostat does not receive any data,
will be shown on the display and it will return
COPY ERROR
to the last viewed program.
•
Transferred data are fixed and include the following:
- Date and Time
- Set
(comfort) for winter
t1
- Set
(economy) for winter
t2
- Set
(absence) for winter
t3
- Set
(comfort) for summer
t1
- Set
(economy) for summer
t2
- Set
(absence) for summer
t3
- Room temperature OFFSET and operation type
- Hysteresis, season,
exclusion and TX intensity
t3
- Password and Master enabling
- Level of t Set (if in manual) and of the hours at the end of temporary
manual
- Program
P 01
- Program
P 02
- Program
P 03
- Value of the upper block of SET
for winter
t1
- Value of the lower block of SET
for winter
t2
- Value of the upper block of SET
for summer
t1
- Value of the lower block of SET
for summer
t2
Chronothermostat 1
Chronothermostat 2
press for 4 seconds
fig. 35
0
8
10 12 14 16 18
2
4
6
t1
t2
t3
20 22
0
8
10 12 14 16 18
2
4
6
t1
t2
t3
20 22
77
EN
Summary of Contents for 1TXCRTX05
Page 52: ...Pagina 52 di 53...
