Permobil M300 Corpus HD User Manual Download

Page: 180 / 206

M300 Corpus HD

Maintenance and repairs

12.

Lift/push the new batteries in to the chassis using the battery
straps.

13.

Connect the battery terminals on the new batteries. Also see the
sticker on the inside of the chassis front cover.

14.

Remount the electronics.

15.

Remount the seat support with the two screws.

16.

Remount the chassis covers.

5.5

Batteries storage

• The wheelchair must not be stored in areas subject to

condensation (steam or moisture on surfaces), e.g. utility rooms
or similar.

• If the wheelchair is equipped with acid batteries, the acid level

must be regularly checked. If the wheelchair is equipped with gel
or AGM batteries, the liquid level does not need to be checked.

• Battery service life depends on regular charging and avoiding

complete discharge of the batteries.

5.5.1

Short-term storage

For short-term battery storage, the room must be at least 41.0°F. If
the temperature is lower than this, the batteries may not charge fully
and may be more vulnerable to corrosion.

180

Summary of Contents for M300 Corpus HD















































































































































































































Search results

Summary of Contents for M300 Corpus HD

Reviews:

Related manuals for M300 Corpus HD

Brands by name

Popular brands

Permobil M300 Corpus HD, User Manual

Search results

Summary of Contents for M300 Corpus HD

Reviews:

Related manuals for M300 Corpus HD

Brands by name

Popular brands