Permobil M300 Corpus HD User Manual Download Page 173

Page: 173 / 206

M300 Corpus HD

Maintenance and repairs

5.3

Cleaning

Regular care and maintenance will prevent unnecessary wear and
damage to your Permobil product.

Use only the following cleaning methods.

In the case of severe soiling of the upholstery or damage to the
surface finish, contact Permobil for information.

CAUTION!

Switch off the wheelchair before cleaning

Always switch off the power supply to the wheelchair before cleaning.

5.3.1

Metal surfaces

Due to the high quality powder coating, optimum corrosion
protection is guaranteed. Ideally, use a soft cloth or sponge, hot
water and a mild detergent for normal cleaning. Wipe down
carefully with a cloth and water, and dry off.

Remove scuff marks from semi-matte surfaces with soft wax (follow
manufacturer’s instructions).

173

Summary of Contents for M300 Corpus HD















































































































































































































Search results

Summary of Contents for M300 Corpus HD

Reviews:

Permobil M300 Corpus HD, User Manual, Page: 173 / 206

Search results

Summary of Contents for M300 Corpus HD

Reviews: