Permobil M300 Corpus HD User Manual Download Page 142

Page: 142 / 206

M300 Corpus HD

WARNING!

Release the joystick at the first sign of
unexpected behavior!

Do not use the joystick as a support. Fast turns and driving on uneven
surfaces can interfere with your ability to handle the wheelchair safely.

If the wheelchair moves in a way that you do not want, rreelleea

assee tthhee

jjo

oyyssttiicckk!! This always makes the wheelchair stop whatever it is doing.

4.2.4

Driving restrictions

WARNING!

Risk of tipping over

Do not allow the leg rest to hit the ground when climbing obstacles, driving
on uneven surfaces or slopes or when a slope levels out. Make sure there is
sufficient ground clearance to avoid the risk of tipping over.

142

Summary of Contents for M300 Corpus HD















































































































































































































Search results

Summary of Contents for M300 Corpus HD

Reviews:

Brands by name

Popular brands

Permobil M300 Corpus HD, User Manual

Search results

Summary of Contents for M300 Corpus HD

Reviews:

Brands by name

Popular brands