22
The adjustment bar brackets are each held in
place by two screws
4.
Remount the end cover of the backrest profile
by pushing it straight into the end of the profile.
Secure the cover by tightening the screws on
the left and right. See the illustration.
The end cover of the backrest profile is
secured using one screw on the left side
and one on the right
Mounting
1.
Push the threaded rod into the backrest profile and at the same time screw on the driver (1). See the
illustration below.
2.
Apply threadlocker (Loctite 2701) to the ends of the threaded rod and fit the two end pieces (2 & 3)
onto the threaded rod. See the illustration below.
3.
Mount the adjustment bar brackets, which are
each held in place by two screws. See the
illustration.
Loctite 2701
Repairs
Replacing the armrest height adjustment mechanism
