Page: 5/20
User manual
C
ompact
J
oystick
A
dvanced R-net
Document Number: 205311-UK-0, Edition 2. 2009-10
2.4.2.1 On/Off Button
The On/Off button applies power to the control system electronics, which in turn supply
power to the wheelchair’s motors.
Do not use the On/Off button to stop the wheelchair unless there is an emergency. (If you
do, you may shorten the life of the wheelchair drive components).
2.4.2.2 Left Button
Depending on the way the control system has been programmed this key can have
different functions. The factory default function is ‘Mode Drive/Axes’. The ‘Mode
Drive/Axes’ function allows the user to switch between the drive mode and local axes
mode
2.4.2.3 Right Button
Depending on the way the control system has been programmed this key can have
different functions. The factory default function is ‘Next’. The function ‘Next’ allows the
user to select the next profile or the next axis depending in which mode you are at that
moment.
2.4.2.4 External On/Off Switch Jack
This allows the user to turn the control system on and off using an external device, such as
a buddy button.
2.4.2.5 External Profile Switch Jack
Depending on the way the control system has been programmed an external connected
device, such as a buddy button, can have different functions. The factory default function
is ‘Horn’. The horn will sound while the connected switch is pressed – as long as the
standard function is selected.
2.4.2.6 Battery/Service Indicator
In normal operating state this displays the charge available in the battery and can be used
to alert the user to the status of the battery.
Green
Continuous
This indicates that all is well. Battery level is >70%.
Green Long Flashing
This indicates that all is well. Battery level is between 50% and 70%.
Green
Short
Flashing
This indicates that all is well. Battery level is between 30% and 50%.
Red
Continuous
The control system is functioning correctly, but you should charge the battery as
soon as possible. Battery level is <30%.
In addition to the indication of the battery level, the Battery/Service Indicator
displays:
Alternating Green/Red Flashing
The ´slow´ alternating flashing is the reconfiguration, fast flashing is request to
shut down and restart the system. (after adding or removing e.g an extra joystick).
Red Flashing
The system has detected an inhibit. See CJA State Indication Chart. 3.11
Green Pulse with Red Failure Indication
The system has detected a failure. Service is required.
See CJA State Indication Chart.
No Light
System is off.
