Page: 15/20
User manual
C
ompact
J
oystick
A
dvanced R-net
Document Number: 205311-UK-0, Edition 2. 2009-10
3.5 Joystick Module Wiring
The Joystick Module is connected to the Power Module with a Communication Cable.
To connect the Communication Cables:
- Holding the connector housing, firmly push the connector into its mate until you can no
longer see the yellow plastic. The connectors are secured using a friction system.
To disconnect the Communication Cables:
- Holding the connector housing firmly, pull the connectors apart.
3.6 Power Module & ICS Wiring
Contact Permobil Europe BV if you need further information and advice.
3.7 Programming Connection
3.7.1 PC Programming
To utilize the R-net PC Programming Suite the R-net Dongle must first be connected in the
communications system as shown. A USB cable can then be connected between the
Dongle and a PC with the R-Net PC Programmer installed. . Refer to programming
manual Art.no: 205314-UK-0 for more details.
