Page: 12/20
User manual
C
ompact
J
oystick
A
dvanced R-net
Document Number: 205311-UK-0, Edition 2. 2009-10
3. Installation
3.1 R-net Operation
Study Chapter 2. It is important that the operation information in Chapter 2 is supplied,
either as part of the wheelchair user handbook or as a separate document.
3.2 Program Settings
It is the wheelchair manufacturer’s or dealer responsibility to program the control system to
suit the vehicle model and ensure safe operation in compliance with relevant legal
requirements over the whole of the operating range. Permobil Europe BV accepts no
liability for losses of any kind due to failure to, or incorrect programming of the R-net
Control System. Refer to programming manual Art.no: 205314-UK-0 for more details.
Programming should only be conducted by healthcare professionals with in-depth
knowledge of PGDT electronic control systems and of the CJA R-net of Permobil
Europe BV
Incorrect programming could result in an unsafe setup of a wheelchair
for the user.
3.3 Connections
The following is a selection of the most common configurations
3.3.1 Control Configurations
3.3.1.1 Basic Configuration
Consists of a Power Module, a Communication Cable and a Joystick Module.
