12
Magnetic brakes
Fig. 17. Magnetic brake release cable.
Magnetic brakes
Removal
1.
Raise the seat lift to its highest position,
see page 7.
2.
Switch off the power using the control panel.
3.
Put the circuit breaker in the “OFF” position,
see page 20.
4.
Remove the battery cover and rear cover,
see page 8.
5.
Remove the battery from the side you are
working on, see page 9, to facilitate removal of
the magnetic brake.
6.
Disconnect the electrical connector from the
magnetic brake, see fig. 16.
7.
Pull the cable sleeve forwards and take the
cable out through the slot in the cable mounting.
Unhook the brake release cable from the
magnetic brake, see fig. 17.
8.
Unscrew the three screws that hold the brake,
see fig. 19. Note the position of the brake
release arm for refitting. Remove the brake,
complete with the disc and cover.
Fig. 16. Magnetic brake electrical connection.
Fig. 18. Magnetic brake fixing bolts.
Summary of Contents for Chairman Playman
