Permobil Chairman Playman, Service Manual

Page: 11 / 28

11
Brake release cables
Fig. 15. Brake release mechanism.
1
2
Brake release cables
The upper cable controls the right brake unit and the lower cable controls the left brake unit.
Removal
1. Raise the seat lift to its highest position, see page 7.
2. Remove the battery and seat lift covers, see page 8.
3. Loosen the locknut, see fig. 15:2.
4. Screw the adjusting screw fully in, see fig. 15:1.
5. Detach the cable at the magnetic brake and brake release mechanism.
Fitting
1. Attach the cable to the magnetic brake, then to the release lever.
2. Adjust the length of the cable sleeve using the adjusting screw (15:1), so that the cable is tensioned
but does not pull the release link.
3. Check the operation. Operate the release lever to release the brake and check that the wheel can turn.
4. Tighten the locknut (15:2).
5. Refit the covers.