BodiLink Head Support Operation Manual
10
INSTALLATION - PERMOBIL “A” MOUNTING BLOCK
For Permobil Corpus Back Supports (23”-28” height) with UniTrack System using the Permobil “A” Mounting Block.
1
If the head support hardware stem (C)
is inserted in the mounting block (B), turn the
knob (A) counterclockwise to release it.
Remove the hardware stem; set aside.
2
Using the 5mm hex key, loosen but do not remove the screws (D) to create a gap
between the double nuts (E) and the mounting block (B).
3
Slide the double nuts (E) into the UniTrack System slots and move into position.
4
Tighten the screws (D)
with the 5mm hex key to secure.
5
Insert the hardware stem (C)
into the mounting block (B)
and turn the knob (A)
clockwise to secure.
IMPORTANT!
Make sure that at least ½” (1.27cm) of the hardware stem is completely through the bottom of the
mounting block (B) at all times. See the warning in the “Important Safety Information” section in this manual.
Note: See SUPPORT PAD installation, positioning and adjustment instructions in this manual to make final adjustments.
3
Track Slots
D
E
1
C
B
A
B
D
E
Summary of Contents for BodiLink Head Support
Page 1: ...BodiLink Head Support OPERATION MANUAL ...
Page 2: ......
Page 95: ......
Page 96: ...UM BODILINK HEAD SUPPORT REV 2019 09 24 permobilus com ...
