3
Permasense Ltd, Alexandra House, Newton Road, Manor Royal, Crawley, RH10 9TT, UK
www.permasense.com
+44 20 3002 0922
Once a sensor is installed, it communicates with the gateway specified during installation and any other
sensors already installed that are assigned to the same gateway. These sensors form a wireless mesh
network. The gateway manages this mesh, selecting the best path to transmit data from each sensor to the
gateway. The gateway then delivers this data to the Permasense Data Manager software, which the end
user can use to view the data in a browser.
Installation requirements
Before sensor installation:
Emerson Smart Wireless gateway must be installed.
Network ID and provisioning information (join keys) for the gateway must be known.
Access to the sensor locations must be in place.
If lines are insulated, all insulation must be removed at sensor locations to allow access for sensor
installation.
Hardware supplied with the sensor
Permasense ET310 sensor, complete with shoe and protective cap
Lanyard kit, comprising 2m of 316 stainless steel lanyard with looped end and cable lock
Strap (3.5m / 138 inches) and strap tensioner
Permasense BP20E power module, one per sensor
Tooling supplied in IK220 installation kit
Rugged tablet PC, preloaded with Permasense installation software
CC21 USB powered commissioning communicator
Ratcheting wrench with 8mm socket
Flathead screwdriver
Tin snips
Hex key, 2.5mm, for power module retaining bolts
