background image

Page | 10 
 

8.0  12 Month Component Guarantee 

If within the guarantee period of a product any defect is discovered in respect of workmanship, construction or 
material, we will make good the defect or replace the defective part at our expense inside normal working hours at 

the company’s premises providing, written notice is given immediately the defect is disco

vered and that, if required 

by us, the part or complete unit is returned to the company’s premises carriage paid. Spares or repaired parts are 

delivered ex works exclusive of fitting. The guarantee does not apply to defects caused by incorrect installation, 
abnormal conditions of working, accidents, misuse or neglect. Our responsibility is in all cases limited to the cost of 
making 

good the defect or replacing the defective part at the company’s premises inside normal working hours. We 

exclude all liability for any consequential or other damage or losses which may occur. We will not be liable if the 
pumping system fails due to it having been incorrectly specified (e.g. where the pump is inundated due to an 
inadequate waterproofing design or where the pump is used to discharge inappropriate media). 
 

 

 

 

 

 

 

All Permagard products are of a high quality and subject to rigid quality control. The company, however, cannot govern the conditions of usage and application of its products and any warranty, 
written or implied covers material only. The information contained in this leaflet is given in good faith but no liability can be assumed by the Company for any damage, loss, injury or patent infringement 
arising from its use.  

Permagard Products Limited

   

Chittening Industrial Estate, Avonmouth, Bristol. BS11 0YB. 

T: 0117 982 3282  W: www.pemagard.co.uk  E:[email protected]

 

Summary of Contents for PermaSEAL











Reviews: