53
Return to
Back Bar Operation Installation Manual
STEP 1.
STEP 2.
8.0
Service Instructions - Doors, Drawers, and Shelving
8.1 Proper Door and Drawer Usage
Note:
Improper use of doors and drawers can
allow extra heat into unit causing extended
compressor run times.
•
Ensure door or drawers are closed
completely and are not left open for a long
duration of time. The door can bounce back
open slightly and appear closed.
•
Ensure the unit is level.
•
Ensure doors and drawers are sealing
properly when closed.
•
No door adjustments should be necessary
unless there is major structural damage to
cabinet.
8.2 Reverse Door Swing
Note:
Changing door swing direction is not
advisable if door is not equipped with full
length handle. Doing so may result in an
undesirable handle position.
Table 8-1. Door Hinges
Support the door in the open position as shown
in Figure 8-1. Remove the hinge pin.
Figure 8-1. Door Removal
Pull door to the side and then lower the door.
HINGE KIT - PART NUMBER DESCRIPTION
67439R
Right Hinging
67439L
Left Hinging
Tools required
Perlick Hinge Kit