47
Return to
Back Bar Operation Installation Manual
7.5 Factory Set Point
Table 7-4. Factory Temperature Settings
7.5.1
Dixell Controller: Reset Factory Parameter
Settings
•
Contact Perlick.
7.5.2
Eliwell Controller: Reset Factory
Parameter Settings
LOADING DEFAULT APPLICATIONS
The procedure used to load one of the default
applications is:
•
When the instrument switches on, press and
hold the
key: the label
AP1
will
appear;
•
Scroll though the various applications (
AP1-
AP2-AP3
) using the
keys;
•
Select the desired application using the key
(
AP3
in the example) or cancel the
procedure by pressing the
key
or
alternatively wait for the timeout;
•
If the operation is successful, the display will
show
y
, otherwise
n
will appear;
•
After a few seconds the instrument will
return to the main display.
LOADING APPLICATIONS WHEN EXITING
STAND-BY MODE
The procedure for loading one of the preset
applications when exiting stand-by mode is:
•
Set the instrument in stand-by mode by
pressing the button for time
H02
;
•
Exit stand-by mode by pressing the
button for time H02;
•
Within 10 seconds of exiting stand-by mode,
press the
button for time
H02
:
AP1
label will appear;
•
Scroll through the various applications (
AP1-
AP2-AP3
) using the keys;
•
Select the desired application using the
key (
AP3
in the example) or cancel
the procedure by pressing the key or
alternatively wait for the timeout;
•
If the operation is successful, the display will
show
y
, otherwise
n
will appear;
•
After a few seconds the instrument will
return to the main display.
Model
Refrigerator
°F (°C)
White Wine
°F (°C)
Red Wine
°F (°C)
BBS, BBSN
PTS, DZS
SDBS, SDPS
BBSLP, DDC
DDS
36
(2.2)
45
(7.2)
60
(15.5)
Single Zone
Models
Dual Zone Models:
Zone 1 Control
Dual Zone Models:
Zone 2 Control
AP1 = Refrigerator
settings (36°F)
AP1 = Refrigerator
settings (36°F)
AP1 = Not Used
AP2 = White Wine
settings (45°F)
AP2 = White Wine
settings (45°F)
AP2 = White Wine
settings (45°F)
AP3 = Red Wine
settings (60°F)
AP3 = Not Used
AP3 = Red Wine
settings (60°F)