UltraPort Serial Adaptors User Guide
Installing host cards and cable accessories
Page 97
Chapter 2 Installing drivers and host cards
Installing cables on UltraPort1, UltraPort1 SI, UltraPort1 Express, UltraPort2, and UltraPort2 SI cards
The UltraPort1, UltraPort1 SI and the UltraPort1 Express have a single DB9 male connector
on the back panel and UltraPort2 and UltraPort2 SI cards have two DB9 male connectors on
the back panel. There is one for each serial port and they are labelled 1 to 2.
You can connect peripheral serial devices directly to the UltraPort2
card by using standard
RS-232 DB9 female connectors on the adapter side of the cable
you are using to
connect the peripheral device.
Installing converter cables on UltraPort2 Express, UltraPort4, UltraPort4 Express, and
UltraPort4 SI-RJ45 cards
UltraPort2 Express, UltraPort4, UltraPort4 Express and the UltraPort4 SI-RJ45 cards have
two to four RJ45 10-pin connectors on the back panel. There is one for each serial port and
they are labelled 1 to 4.
Converter cables with the proper connector on the opposite end can be plugged into these
RJ45 connectors to provide the desired interface.
Installing converter cables on UltraPort8i, and UltraPort81 Express cards
UltraPort8i, and UltraPort81 Expresscards have eight RJ12 6-pin connectors on the back
panel. There is one for each serial port.
Converter cables with the proper connector on the opposite end can be plugged into these
RJ12 connectors to provide the desired interface.
