Perle UltraPort User Manual Download

Page: 60 / 156

UltraPort Serial Adaptors User Guide
Installing under SCO OpenServer and OpenServer6

Page 60

Chapter 2 Installing drivers and host cards

Removing drivers and utilities from your system

To remove the SPEED device drivers and utilities for the SCO OpenServer operating system

proceed as follows:

1. In the SCO OpenServer desktop, double click on the System Administration folder.

The System Administration window is now displayed.

2. In the System Administration window, double click on the software manager icon.

The Software Manager window is now displayed.

3. In the Software Manager window select the driver you want to remove.

4. In the Software Manager menu, click on

Software > Remove software

A confirmation window is now displayed prompting you to confirm removal.

Summary of Contents for UltraPort





























































































































































Search results

Summary of Contents for UltraPort

Reviews:

Related manuals for UltraPort

Brands by name

Popular brands

Perle UltraPort, User Manual

Search results

Summary of Contents for UltraPort

Reviews:

Related manuals for UltraPort

Brands by name

Popular brands