19
Perle IRG5410/5410+Series Router Hardware Installation Guide
IRG5410 Deployment Modes
Fixed Installation with Analog Input
• Pin 1 (Power)—Use the Red wire in the DC cable to connect Pin 1 to the power source.
Include a 4.0 fast acting fuse in the input power line. continuous (unswitched) DC power
source is recommended.
• Pin 2 (Ground)—Use the Black wire in the DC cable to connect Pin 2 to Ground.
• Pin 3 (IGN — Ignition)—Connect to Power.
• Pin (GPIO)— In this example, the GPIO (green) can by used as an analog input and used to
enter and exit standby.
For more information on configuring Standby Mode, Timed Standby Mode and Event Handing see
the Perle IRG5000 Series Router User’s Guide.
