I
Perle IRG
5410/5410+
Series Router Hardware Installation Guide
Preface
Preface
Audience
This guide is for the network or computer technician responsible for installing the Perle
IRG5410/5410+ router also generically referred to as the IRG5410 within this document. All “+”
models support worldwide global coverage for LTE. Familiarity with the concepts and terminology
of LTE, GNSS, Ethernet and LAN (local area networks) is required.
Purpose
Perle routers provide users, networking equipment as well as M2M & IoT appliances with network
connectivity for fixed locations (i.e. buildings, POS, Kiosks, …etc) and mobile (i.e. vehicle, trains,
robots) applications. When used in vehicular applications, the router provides connectivity and is not
involved in the operation of the vehicle or direct interaction with the operators.
This document describes the hardware and physical characteristics of the Perle IRG5410 Series of
Routers. It covers hardware features as well as installation and operation. This document does not
cover how to configure your Perle IRG5410 router. Information to configure your Perle router can be
found in the Perle IRG5000 Series Router User’s Guide and the Perle IRG5000 Series Router CLI
Refernce Guide on the Perle website. Quick Start information can be found in the IRG5410 Cellular
LTE Router Quick Start Guide that came with your product.
Key Features
• Supports bridging/switching and routing
• LTE coverage spanning 21 frequency bands in North America/EMEA (IRG5410) and 30 fre
-
quency bands for global coverage ()
• Fully automatic network switching supporting dual network SIMs
• Routing with Primary/Backup route
• LTE and VPN Fail-over
• Provides network connectivity via LTE, Ethernet, USB-C and Serial
• Active GPS for tracking equipment
• Low Voltage Standby function to prevent battery drain
• One GPIO pin for remote monitoring/control and one IGN (Ignition) pin
• Security via remote authentication (Radius and )
• Processor Power Saving Mode – this feature optimizes idle power consumption, saving
energy by reducing performance where possible
• Power Saving Features including; LED power saving mode, Smart Standby Mode, Power
saving strategies such as turning off unused interfaces (USB, Serial, Ethernet), turning off
GPS and adjusting the Ethernet rate
• Meets industry-grade certifications
