RADIUS and 404
RADIUS
Mapped RADIUS Parameters to IOLAN Parameters
When authentication is being done by RADIUS, there are several
Serial Port
and
User
parameters
that can be set by the RADIUS server. Any parameters sent by that RADIUS server that are not
supported by the IOLAN are discarded. Below is a list of the RADIUS parameters and their IOLAN
parameters:
46
Acct-Session-Time
Number of seconds for which the user has been
connected to a specific session.
47
Acct-Input-Packets
Number of packets which were received from the user
during this session.
48
Acct-Output-Packets
Number of packets which were transmitted to the user
during this session.
49
Acct-Terminate-Cause Indicates how the session was terminated: Supported
values include: 1 = User Request 2= Lost Carrier
3=Lost Service 4= Idle Timeout 5= Session Timeout
14 = Port Suspended 16 = Callback.
61
NAS-Port-Type
For reverse telnet and reverse ssh connections, a type of
Virtual (5) will be sent. For a PPP connection type a
type of Async (0) will be sent. For all direct connect
service types a type of Async (0) will be sent.
77
Connect-Info
.For reverse telnet, reverse ssh and direct serial
connections the serial port baud rate is send to the radius
accounting server.
87
NAS-Port-Id
For sessions originating from the serial port:
<line-name> or “SERIAL:xx”, where xx starts at
serial port 1.
For reverse Telnet and SSH Ethernet sessions:
“ETH:REVSESS:xx”, where xx is the serial port
being accesses, otherwise 00 for a ILOAN
management session.
For Device manager sessions:
“DEVMGR”
For HTTP sessions:
“HTTP”
95
NAS-IPv6-Address
The IPv6 address of the IOLAN
98
Login-IPv6-Host
For LOGIN and CALLBACK service types, the IPv4
address of the login host is sent to the radius accounting
host.
RADIUS Parameter
IOLAN Parameter
Service-Type
This has no IOLAN field, although it needs
to be set to
Framed-User
in the RADIUS
server if the port is set for PPP or SLIP. For
a Console Management profile set the
RADIUS Service-Type to NAS prompt.
Framed-Protocol
Set to SLIP or PPP service.
Type
Name
Description
