110
WLAN
Add/Edit/Delete
Priority
The connect priority order (1 being the highest) in which the IOLAN will
attempt an association with AP’s that match the SSID in the profile. If there are
duplicate priority entries in the table, the IOLAN will connect to the duplicate
entry with the most optimal AP based on signal strength and security type.
Values: 1-8
Default:
1
Name
Enter the name for this profile
Values:
1-32 characters, no spaces allowed
Network Name
(SSID)
Specify an SSID (network name).
Values:
max of 32 characters (no spaces allow)
Default:
none or auto-created SSID
Radio Band
The IOLAN can operate over 2.4GHz or 5GHz. To support connections to one
or the other bands use 2.4+5.
Values: 2.4, 5, 2.4+5
Default:
2.4+5 (dual-band)
Scan DFS Channel
The IOLAN supports DFS. When connected to an AP that is using Dynamic
Frequency Selection, it will respond to the specific protocol requests. When
scanning channels for AP’s the IOLAN provides the option of skipping the
DFS protected channels.
Values:
off or on
Default:
on (applies to 5GHz mode only)
Hidden SSID
If this profile is defined to connect to an AP that has a hidden SSID then this
option must be enabled. This will force the IOLAN to send a directed probe to
this AP with the specified SSID in order to discover it and determine the
channel that it is using.
Values:
off or on
Default:
off
