237
Advanced
Data Logging
Buffer Size
The minimum data buffer size for all models is 1 KB. The maximum data
buffer size is 2000 KB for DS1/TS2/STS8D, all other models are 4000 KB. If
the data buffer is filled, incoming serial data will overwrite the oldest data.
Values:
1-2000 KB (DS1/TS1/STS8D) - Default 4 KB
Values:
1-4000 KB (all other models) - Default 256 KB
The Data Logging buffer size is a valid option for the
.
Default:
Disabled
Pre V4.3G Data
Logging Mode
Enable the data logging feature previous to v4.3G firmware.
Default:
Disabled
Serial Port Menu
String
When a user connects to the IOLAN through the network, the string used to
access the Easy Port Access menu without disconnecting the network
connection.
Data Options:
You can specify control (unprintable) codes by putting the
decimal value in angle brackets < > (for example,
ESC-b
is
<027>b
).
Default:
~menu
Session Escape
String
When a user connects to the IOLAN through the network, the string is used to
access the Reverse Session Menu.
Data Options:
You can specify control (unprintable) codes by putting the
decimal value in angle brackets < > (for example,
ESC-b
is
<027>b
).
Default:
<026>s (Ctrl-z s)
Power Management
Menu String
Users accessing the IOLAN through the network can enter the string to bring
up the Power Bar Management menu.
Data Options:
You can specify control (unprintable) codes by putting the
decimal value in angle brackets < > (for example,
ESC-b
is
<027>b
).
Default:
<016> (Ctrl-p)
Monitor
Connection
Interval Status
Specify how often, in seconds, the IOLAN will send a TCP Keepalive to
services that support TCP Keepalive.
Default:
180 seconds
Retry Interval
Sets the maximum time to wait for a response asfter sending a TCP keep alive
message.
Options:
1-32767
Default:
5 seconds
Retry Attempts
The number of TCP keepalive retires before the connection is closed.
Values:
1-32767
Default:
5
