PerkinElmer STA 8000, Installation And Hardware Manual

Page: 38 / 64

38 . STA 8000 Installation and Hardware Guide
Unpacking the STA 8000
The STA 8000 system consists of the following components:
• STA 8000
•
Personal Computer
•
Printer (Optional)
• Chiller (Optional)
The STA 8000 is able to operate using mains supply voltages of 100–120 VAC or
200–240 VAC. The analyzer automatically adjusts for the supplied voltage; no manual
adjustments are needed.
The STA 8000 comes wrapped in plastic and is surrounded by foam on all sides of the
analyzer. To unpack the analyzer, follow the steps below:
1. Remove the foam inserts from the box.
2. Remove the analyzer from the box.
WARNING
AVERTISSEMENT
Use the proper lifting posture w hen taking the analyzer out
of the shipping carton base. Bend your knees w hen lifting
and securely hold on to the analyzer as you lift.
Utilisez la position de levage appropriée lorsque vous retirez
l'analyseur de la base du carton d'expédition. Pliez vos
genoux lors du levage et maintenez-le bien sur l'analyseur
lorsque vous soulevez.
3. Remove the foam from all sides, resting the analyzer on its left or right side as
necessary.
4. Remove the tape and plastic from around the analyzer.
5. Remove the tape from the outer furnace lid and remove the lid. Place it to the side.
6. Remove the packing material from inside the furnace area.
7. Remove the tape from the connectors on the rear of the instrument.
It is recommended that you save the shipping foam should the analyzer require shipment to
another facility in the future.
Parts Included
The STA 8000 comes in two boxes and consists of the following components:
• STA 8000
•
Pyris software
•
Spares and Accessories Kit