PerkinElmer Lambda 25 User Manual Download Page 25

Page: 25 / 116

Lambda 25, 35, 45 User’s Guide

Conventions Used in this Manual

Normal text is used to provide information and instructions.

Bold

text refers to text that is displayed on the screen.

UPPERCASE

text, for example

ENTER

ALT

, refers to keys on the PC keyboard.

‘+’ is used to show that you have to press two keys at the same time, for example,

ALT

Definitions

Responsible body

: individual or group responsible for the use and maintenance of

equipment, and for ensuring that operators are adequately trained.

Operator

: person operating equipment for its intended purpose.

Notes, cautions and warnings

Three terms in the following standard formats, are also used to highlight special
circumstances and warnings.

NOTE:

A note indicates additional, significant information that is provided with some

procedures.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Lambda 25





















































































































Search results

Summary of Contents for Lambda 25

Reviews:

Related manuals for Lambda 25

Brands by name

Popular brands

PerkinElmer Lambda 25, User Manual

Search results

Summary of Contents for Lambda 25

Reviews:

Related manuals for Lambda 25

Brands by name

Popular brands