XRpad2 4336
32
68153 01
D
IGIT
A
L
I
MAGING
9.2
Monthly Inspection
Perform the following inspection at least once a month. If there is a problem, immediately
ask your establishment’s safety department to contact your dealer, distributor, or device
manufacturer.
9.3
Yearly Inspection
Perform the following inspection at least once a year. If there is any problem, immediately ask your
establishment’s safety department to contact your dealer, distributor, or device manufacturer.
Inspection
Result
Remedy
Date
/
Date
/
Date
/
General
Execute the Dark Noise
and X-ray Uniformity tests
(refer to the
Digital X-ray Detector
System Reference Manual
).
Good/Bad Good/Bad Good/Bad If there are changes in
performance, acquire new
calibration files as described
in the
Contact your dealer,
distributor, or device
manufacturer if there is any
problem.
Make sure that the XRpad
IPU-2 is clean from dirt or
dust.
Good/Bad Good/Bad Good/Bad Use the instructions in
“Section 8.5.1.6, Cleaning the
XRpad2 LBP” on page 17
for
cleaning.
Check the manufacturing
date of all Battery Packs to
ensure that their age is not
five years or older.
Good/Bad Good/Bad Good/Bad Replace the Battery Pack with
a new one and recycle the old
one.
Inspection
Result
Remedy
Date
/
Date
/
Date
/
General
Execute the Dark Noise,
X-ray Uniformity, Bad
Pixel, and Resolution tests
(refer to the
Digital X-ray Detector System
Reference Manual
).
Good/Bad Good/Bad Good/Bad If there are changes in
performance, acquire new
calibration files as described
in the
.
Contact your dealer,
distributor, or device
manufacturer if there is any
problem.