manualshive.com logo in svg

Perkin-Elmer XRpad2 4336, User Manual, Page: 10 / 67

Share
Download
Perkin-Elmer XRpad2 4336 User Manual Download Page 10

D

IGIT

A

L

 I

MAGING

x

www.perkinelmer.com

68153 01

For Your Safety

XRpad2 4336

Maintenance and Inspection

WARNING

Turn off the power of the X-ray detector when the inspections 
indicated in this manual are going to be performed. Ignoring this 
warning may result in electric shock, which may result in severe 
personal injury, death, or substantial product damage.

WARNING

When the X-ray detector system is going to be cleaned, turn off the 
X-ray detector and remove the battery. If the X-ray detector is 
connected to a power supply, turn off the power switch and/or unplug 
the power supply cable from the AC outlet. If the X-ray detector is 
battery powered, remove the battery. Never use thinner, benzine, 
acetone, or other flammable cleaning agents. Ignoring this warning 
may result in explosion, fire, or electric shock, which may result in 
severe personal injury, death, or substantial product damage.

WARNING

The X-ray detector must be repaired by X-ray detector manufacturer-
authorized personnel only. Ignoring this warning may result in 
explosion, fire, electric shock, or unknown hazards, which may result 
in severe personal injury, death, or substantial product damage.

Caution

Follow the manufacturer’s recommendations for inspecting the X-ray 
detector before use.

Summary of Contents for XRpad2 4336




































































Reviews:

No comments