68153 01
www.perkinelmer.com
1
D
IGIT
AL
I
MAGING
1.0
Scope
This document describes design elements and respective interfaces for the XRpad2 4336 detector.
Applicable mechanical, electronic, and software interfaces are addressed. PerkinElmer digital
X-ray Flat Panel Detectors and their accessories are components designed to be integrated into
products by X-ray system manufacturers. Manufacturers are responsible for qualifying, validat-
ing, and certifying their products for their intended uses and meeting all applicable regulatory
requirements.
Final application and intended use is based on the completed X-ray system design. It is the
responsibility of the X-ray system manufacturer to confirm the efficacy and compliance of the
X-ray system for its intended use, inclusive of the detector. The Digital Radiography Software
referred to in this manual is medical imaging software for radiography, which is typically
supplied by the X-ray system manufacturer or third-party provider and is not part of the
XRpad2 4336 detector.
2.0
Usage
The XRpad2 4336 detector is a component of a digital imaging system used for generating
radiographic images of human anatomy for diagnostic X-ray procedures, wherever conventional
Screen-Film (SF), Digital Radiography (DR), or Computed Radiography (CR) systems may
be used.
3.0
Audience
This document is for users of the X-ray detector and for X-ray system manufacturers and X-ray
system installers who are responsible for installing the X-ray detector into an X-ray system.