Peri MULTIPROP, Instructions For Assembly And Use, Page: 7 / 58

5
MULTIPROP System
Instructions for Assembly and Use – Standard Configuration
Introduction
The use in a way not intended, deviating
from the standard configuration or the
intended use according to the Instruc-
tions for Assembly and Use, represents
a misapplication with a potential safety
risk, e.g. risk of falling.
Only PERI original components may be
used. The use of other products and
spare parts is not allowed.
Changes to PERI components are not
permitted.
Features
The MULTIPROP System is used in
shoring construction in planned perpen-
dicular position to transfer vertical loads.
Main components
MULTIPROP 120, L = 0.80 – 1.20 m
MULTIPROP 250, L = 1.45 – 2.50 m
MULTIPROP 350, L = 1.95 – 3.50 m
MULTIPROP 480, L = 2.60 – 4.80 m
MULTIPROP 625, L = 4.30 – 6.25 m
MULTIPROP Frame MRK, Steel
Frame MRK 62.5
Frame MRK 75
Frame MRK 90
Frame MRK 120
Frame MRK 137.5
Frame MRK 150
MULTIPROP Frame MRK, Aluminium
Frame MRK 201.5
Frame MRK 225
Frame MRK 230
Frame MRK 237
Frame MRK 266
Frame MRK 296
System dimensions
Assembly heights as single props
according to the permissible extension
lengths 0.80 m – 6.25 m or 1.30 m –
6.75 m together with Base MP 50.
Assembly heights as system with Frame
MRK up to a maximum of 14.40 m, or
14.90 m with Base MP 50.
In the ground plan, square or rectangular
depending on the Frame MRK used,
from 0.625 m to 2.96 m.
Permissible load-bearing capacity =
leg loads
Correspond to design class B1 as per
DIN EN 12812.
The load-bearing capacity of the shor-
ing towers in the MULTIPROP System
is dependent on the position of the
MULTIPROP Frame MRK. The capaci-
ties are stated in the relevant current
versions of the type test.
Product description
PERI products have been designed
for exclusive use in the industrial and
commercial sectors by suitably trained
personnel only!
These Instructions for Assembly and
Use describe the standard configuration
for shoring in accordance with the
provisions of DIN EN 12812.
MULTIPROP Slab Props MP can be used
in combination with the Frame MRK as a
table or tower to transfer vertical loads.
The outer tubes of the MULTIPROP Slab
Props are powder coated. The Frames
MRK can be mounted on both the outer
and inner tube without changing the
system dimensions.The integrated
measuring tape and free-running collar
allow accurate and fast height adjust-
ment. The MULTIPROP Slap Prop has a
fail-safe feature which prevents the inner
tube from unintentionally slipping out.
Markings on the outer tube facilitate the
exact assembly of the Frame MRK. For
any assembly work, only a hammer is
required.
Intended use
Instructions on use
AuV MULTIPROP EX.indb 5 07.01.16 11:55