Peri MULTIPROP, Instructions For Assembly And Use, Page: 17 / 58

15
MULTIPROP System
Instructions for Assembly and Use – Standard Configuration
A2 MULTIPROP System
Tilting Base MKF
The Tilting Base MKF (4) with the
quick-action clamp coupling can be
pivoted 3° on all sides. This means that
MULTIPROP props can be positioned on
inclined surfaces.
(Fig. A2.12)
Technical data
Max. permissible load-bearing
capacity 60 kN.
Use Tilting Base MKF only with
braced props!
The fi rst Frame MRK must be
mounted no more than 40 cm above
the upper edge of the base plate!
Assembly
1. Insert centering pins (4.3) of the base
plate (4.1) into the drilled holes of the
prop base plate (1.8) or head plate (1.9).
2. Hit clamping claws (4.2) with a ham-
mer over the prop base or head plate.
Tilting Base MKF is connected to the
prop. (Fig. A2.13)
3. Spindle Tilting Base MKF with rotary
wings (4.4) to size. Max. spindle
extension: 100 mm.
– When under load, the rotary wing kan
be turned by means of a nail puller.
(Fig. A2.14)
– Never loosen the rotary wings with
force e.g. hammer blow. Risk of
breakage! (Fig. A2.14a)
Releasing
Spindle props without load!
1. Open clamping claws (4.2) using
a hammer.
2. Remove Tilting Base MKF.
Fig. A2.12
Inclination max. 3°
≤ 40
0
Fig. A2.13
Fig. A2.14 Fig. A2.14a
4
4
1.8/1.9
4.4
4.4
4.1
4.3
4.1
4.2
AuV MULTIPROP EX.indb 15 07.01.16 11:55