Peri MULTIPROP, Instructions For Assembly And Use, Page: 22 / 58

20
MULTIPROP System
Instructions for Assembly and Use – Standard Configuration
A3 Horizontal Assembly
Assembly with 4 legs
Assembling the tower
4. Insert second pair of props into the
opened wedge connections of the
frames.
5. Close wedge connections and
hammer in wedges.
6. Install top frames. (Fig. A3.04)
The tower has now been assembled.
Before erecting, ensure that all adjusting
collars are resting against their respec-
tive rubbing plates. Are the safety hooks
closed?
– With larger units, the upper props can
be inserted separately. Connect the
props to each other before connecting
them to the frames.
– For towers with heights > 7.0 m,
a scaffold tube with a diameter of
48.3 x 3.2 as horizontal diagonal (10)
is to be attached to the Frames MRK
by means of swivel couplings at about
half the tower height to ensure the
cross-section shape. (Fig. A3.05)
Fig. A3.05
Fig. A3.04
10
AuV MULTIPROP EX.indb 20 07.01.16 11:56