Pergola kits USA WOOD PAVILION, Assembly Manual

Page: 17 / 32

17
Install the tin, starting at the
center and moving to each
end. Ensure the first piece is
installed squarely. Keep the
bottom of the tin flush with
the drip edge. Fasten with 1”
screws. The first piece will
have 3 screws at every lath.
Lay out the roof tin.
Install the drip edge over the
bottom lath piece. Cut each
piece to length. Fasten with
1" screws, staples, or nails
every 16".
4
5
Install the ribbing roughly
1 1/2-2" from the bottom of
the drip edge. Do not stretch
the ribbing because the
grooves of the roof must
line up with the ribs.
LATH
LATH
3
2