Pergola kits USA WOOD PAVILION, Assembly Manual

Page: 31 / 32

3
2
1
5
4
Electrical Package Assembly
for Wood Structures
NOTE: A qualified electrician is required to install any electrical work beyond the provided steps and
roughed-in wiring package.
Locate wiring package trim
piece. The end with the short
wire is the bottom.
Pass the bottom wire through
the post base trim piece.
Place trim piece on the inside
of the center post with short
wire down. Be sure to center
in post.
Fasten the electrical trim
piece to the post, being sure
not to screw into wire. Use
two 2 1/2” screws at the top
and the bottom of the electri-
cal trim piece.
Continue on with step 40
page 13 of the instruction
manual.
31