Squarely align the two 2x12
plates forming a right angle. It
is important that the top plate
boards equally overhang the
structure to accurately center
the roof. Fasten the two 2x12
plates together at the corner
with one 3 1/2" screw. Once
you have all four corners
together, put two 2 1/2" screws
down into the header approxi-
mately every 16" all around.
Fasten tie straps, ST2215, with
1 1/2” screws at every seam
on the top of the plate.
Fasten the marked "Side
Rafters" to a marked "Ridge
Pole" at each "X", keeping
one edge of the rafters flush
with the vertical line and the
top edge flush with the top of
the ridge pole. If you ordered
a square pavilion, turn to
page 28 and follow the
instructions.
Install the four 2X12 top plates.
The top plates should mount
close to flush with the inside
post. Make sure that the over-
hang is the same on both sides.
Use two 3 1/2" screws to fasten
the plates to the posts. Do not
cut these without calling. Be
sure that the vinyl side faces
downward.
8
22
23
20
21
Summary of Contents for PREMIUM VINYL PAVILION
Page 34: ...You are now ready to return to page 12 step 38 19 34...
Page 35: ...35 Notes...
Page 36: ...36 Notes...