3X
Screw the two sections togeth-
er at the top with two 2 1/2”
screws between every rafter.
Keep ends even.
Set finished sections up onto
plate.
Anchor each rafter to the
plate on the marked “X”s
using three 3 1/2” screws,
staying flush with the vertical
line keeping 1/4-1/2" away
from the edge of the plate.
Fasten two 2x4 temporary
props at either end of ridge
pole to hold in place.
9
25
27
26
24
Summary of Contents for PREMIUM VINYL PAVILION
Page 34: ...You are now ready to return to page 12 step 38 19 34...
Page 35: ...35 Notes...
Page 36: ...36 Notes...