5X
Place the 90 degree vertical
notch against the corner of
the compression ring. Be sure
to keep the bottom edge of
the hip rafter flush with the
bottom edge of the com-
pression ring. Screw 3 1/2"
screws into each pre-drilled
hole from the inside of the
compression ring.
Locate four hip rafters, which
are two boards screwed
together. The ends with a 90
degree vertical notch go
toward the compression ring.
Fasten rafters centered on
the marked line, located on
the plate. Screw five 3 1/2"
screws, two horizontally on
each side and one on the top
side of the rafter. Be sure to
fasten each opposite side
first. Do not work clockwise.
Repeat with all four hip
rafters working clockwise.
31
7
9
8
10
Summary of Contents for PREMIUM VINYL PAVILION
Page 34: ...You are now ready to return to page 12 step 38 19 34...
Page 35: ...35 Notes...
Page 36: ...36 Notes...
