8
Note: Hold the bucket with both hands when emptying, then put it back in appliance. Note:
When the bucket is full or removed from the unit, the compressor will shut off, the unit will
not be removing moisture from the air at this time.
Note: During operation, it is normal for the unit to exhaust warm air from the front
of the unit.
Caution: Do not place the bucket on the floor when it is full as it may spill.
* Continuous drain
Connect the drain pipe on the hole of unit, then the unit can continuous run
without clean the bucket.
1) Put the unit on level floor, take out the bucket, remove the chip of bucket;
2) Install the pipe on drain nozzle which can be found inside of the unit ;
3) Place bucket correctly and assure the drain tube is not pinched or blocked.
4) Press “ ” button to operate the unit.
Note: If no need the function of continuous drain, please remove the drain pipe and
put back the bucket in unit correctly, then the water will flow into bucket.
* If the continuous mode will be used, it is best to use the drain tube, otherwise water
will flow into the bucket.
Note: Please install the drain pipe as shown in the below picture.
Please install the drain pipe correctly, or the water cannot drain from
the pipe.
Correct
Incorrect
MAINTENANCE
