2
IMPORTANT SAFEGUARDS
Utilize two or more people to lift and install the unit.
Be sure all accessories are removed from the packing before use.
To avoid possible injury
,
avoid contact with the metal parts of the appliance when removing or re-
installing the filter. It can result in the risk of personal injury.
Do not block the air inlet or outlet of the appliance. Reduced air flow will result in poor
performance and could damage the unit.
Always grasp the plug when plugging in or unplugging the appliance. Never unplug by pulling
on the cord. It can result in the risk of electrical shock and damage.
Install the appliance on a sturdy level floor capable of supporting up to 110lbs(50kg).
Installation on a weak or unlevel floor can result in the risk of property damage and personal
injury.
Close all doors and windows to the room for most efficient operation.
GWP: R410A: 2088, R134a: 1430, R290: 3
IMPORTANT - GROUNDING METHOD
This product is factory equipped with a power supply cord that has a three-pronged
grounded plug. It must be plugged into a mating grounding type receptacle in accordance
with the National Electrical Code and applicable local codes and ordinances. If the circuit
does not have a grounding type receptacle, it is the responsibility and obligation of the
customer to exchange the existing receptacle in accordance with the National Electrical
Code and applicable local codes and ordinances. The third ground prong should not,
under any circumstances, be cut or removed. Never use the cord, the plug or the appliance
when they show any sign of damage. Do not use your appliance with an extension cord
unless it has been checked and tested by a qualified electrical supplier. Improper
connection of the grounding plug can result in risk of fire, electric shock and/or injury to
persons associated with the appliance. Check with a qualified service representative if in
doubt that the appliance is properly grounded.
ELECTRICAL CONNECTIONS
The mains power supply corresponds to the value indicated on the rating plate on
the back of the appliance.
The power socket and electrical circuit are adequate for the appliance.
The mains socket matches the plug. If this is not the case, have the plug replaced.
The mains socket is adequately earthed. Failure to follow these important safety
instructions absolves the manufacturer of all liability.
Before plugging the appliance into the mains socket, check that:
