12
TECHNICAL PARAMETERS
PROBLEM
Appliance runs too
long
Frost apears on
heat-exchanger
Fan noise
Water on the floor
The area is too large
Doors and windows are
open
Appliance run recently or
the room temperature is
too low
The air is passing through
the appliance
The capacity of the appliance
can not meet the area of the
room
Close the door and window
It is normal, frost usually
disappear in 60 min
This is normal
Check the drain connection if
the appliance is at level
If using the water tank, remove the
drain pipe and put back the drain
cover; or install the drain pipe
correctly
The drain connection may
be aging
The drain pipe is connected,
but the water is not draining
POSSIBLE CAUSES
SOLUTION
EH
E1
E2
CODE
DESCRIPTION
Humidity sensor failure
Temperature sensor failure
Operation temperature range: 41℉~90℉
(
5℃~32℃
)
Operation humidity range: 30%RH~90%RH
If the following error code appears, contact the after-sales service department for
inspection and repair.
