Press the
button until the “ DRY ” and “ FAN ”symbols are both lit .
“ MODE ”
In this mode the humidity can be set like dehumidifying mode, and when the
ambient humidity is lower than the setting, the fan will running continuous.
* Fan mode
When the appliance is running, press the “ MODE ” button until the “ FAN ”
symbol is lit, you can startup or shutdown the fan function.
The screen display below:
In this function, the compressor will not run, and the appliance is not dehumidifying.
6
INSTRUCTIONS
“ ” on / off button
On / off power supply used to control the startup or shutdown of the appliance.
Decrease / Increase button
Press “ + ” / “ - ” to select the indoor humidity level you expect to achieve, or set
the time when using "timer" setting.
Mode selection:
Press the “ ” button to turn on the appliance, and press the “ MODE ” button
to browse different modes.
Press the “ MODE ” button until the “ DRY ” symbol is illuminated.
Press the “ + ” or “ - ” to choose the humidity desired, adjustable range is 35%
RH-80%RH. The screen will display the setting humidity, and after 5 seconds, turn
the display to ambient humidity.
* Dehumidify mode
* Continuous mode
”
indicator is
Under dehumidify mode, Press the “ - ” button until the
“
illuminated, then the unit will continuously run.
* Turbo mode
Press the “MODE ” button until the “ TURBO ” symbol is lit.
In this mode humidity can not be adjusted, and screen will display ambient humidity.
After running 24 hours, the appliance will quit turbo mode, turn to dehumidifying mode
and set humidity 60%RH.
* Dehumid FAN mode
