Installation and Operation Manual for the
Perenio®
PEACG01 Control Gateway
©Perenio IoT spol s r.o. All Rights Reserved
Doc Version: 2.0.0
Page
3
of
32
Introduction
The Control Gateway is specially designed to monitor and manage the operation of all
connected sensors and other ZigBee devices without passing commands to third party
servers. It is used as part of the
Perenio
Smart Building Management System
and
acts as a ZigBee Coordinator and ensures a reliable wireless data transmission.
The present Manual contains a detailed description of the device, as well as instructions
for its installation and operation.
Copyrights
Copyright of ©
Perenio IoT spol s r.o
. All rights reserved.
The
Perenio®
trademark is owned by
Perenio IoT spol s r.o.
(hereinafter referred to
as the
Perenio IoT
). All other similar trademarks and names, as well as logos and other
symbols are the property of their respective owners*.
All materials under
Perenio®
tradename contained therein are protected in
accordance with international and local laws including Acts on copyrights and related
rights.
Any reproduction, copying, publication, as well as further distribution or public display
of materials contained in the present document (whether in full or in part) shall not be
allowed until an appropriate permission of the copyright owner is obtained. Any
unauthorized usage of materials contained therein may lead to civil liability and
criminal prosecution in accordance with applicable laws.
Any eventual mentioning of other company names and equipment in the present
document is made solely for the purpose of clarifying and describing the device
operation and shall not infringe on the third party’s intellectual property rights.
*ZIGBEE
is the registered trademark of
ZigBee Alliance;
iOS
is the registered trademark of
CISCO TECHNOLOGY, INC.;
Android
is the registered trademark of
Google Inc.;
Google Play
is the trademark of
Google Inc.;
App Store
is the
registered trademark of
Apple Inc.;
Linux
is the registered trademark of
Linus Torvalds.
