Installation and Operation Manual for the
Perenio®
PEACG01 Control Gateway
©Perenio IoT spol s r.o. All Rights Reserved
Doc Version: 2.0.0
Page
15
of
32
2.1 Initial Installation and Configuration
To ensure proper installation and operation of the Control Gateway, the User shall
perform the following steps:
1. Unpack the Control Gateway,
i
nstall it on a stable flat surface and connect to the
mains (220V
) using
the power adapter supplied
.
2. Install the
Perenio Smart Building Management System
mobile application
on your smartphone and login in the User Account (See par.
A
below).
3. Scan the QR Code, or enter CG data manually (See par.
B
below).
4. Enter your Wi-Fi Network data (See par.
C
, as well as par. 2.4 for the suitable
Network frequency selection).
5. Enter the desired
Control Gateway
name, Location and Room (See par.
D
below)
.
ATTENTION!
The Device must not be switched off or disconnected from the
mains for at least
5 MINUTES
after the RESET Button is pressed, as well as for
at least
10 MINUTES
after the firmware update process is started.
A
.
INSTALLATION OF THE PERENIO SMART MOBILE APP
The Control Gateway shall be managed through a free
mobile application available for downloading in Google Play
or Apple Store.
In order to login to the User Account, follow the steps
below:
a.
Connect your smartphone to the Wi-Fi Network and
download
the
Perenio
Smart
Building
Management System
app from the Google Play or
the Apple Store;
b.
Register a new User Account (
See par.
A.1.
below
) or
sign in to an existing User Account (
See par.
A.2.
below
).
