AFJ2T/AFJ2T-BMC
V. 02 – 24/08/2018
4
©Velleman nv
Make sure the area under the vehicle is clear before lowering.
All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Familiarise yourself with the functions of the device before actually using it.
Only use the device for its intended purpose. Using the device in an unauthorised way will void
the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty
and the dealer will not accept responsibility for any ensuing defects or problems.
Keep this manual for future reference.
4.
Overview
Refer to the illustrations on page 2 of this manual.
A
saddle
F
rear castor
B
carrying handle
G
front wheel
C
cover plate
H
handle
D
handle socket
I
overload valve (do not adjust!)
E
release valve
J
oil filler plug
5.
Operation
Always comply with the safety instructions as described in §2.
Before Use
1.
It is possible that during shipment of the device air gets trapped inside the hydraulic system
causing malfunctioning. Turn the release valve [E] one turn counter clockwise and push the
saddle [A] all the way down.
The open end of the handle [H] can be used to turn the release valve.
2.
Remove the cover plate [C], locate and remove the oil filler plug [J].
3.
Insert the handle [H] into the socket [D]; slide the protrusion of the handle into the slot on
top of the socket and twist handle clockwise to secure it.
4.
Quickly pump six to eight full strokes to remove air in the system.
5.
Close the oil filler plug [J] and place the cover plate [C] back.
The overload valve [I] is calibrated to 2 tonnes. Never adjust this overload valve [I].
