PEQUEA SuperSpread PTO 135, Operator'S Manual, Page: 22 / 28

20
Troubleshooting
Problem Possible Cause Correction
Machine is engaged but
spreader is not functioning Material has jammed agitator Disengage machine, raise end
gate & remove foreign material
Material has jammed spinners/
beaters Disengage machine from power
source and remove foreign
material
Tractor hydraulic oil level might
be too low Fill oil reservoir to proper level
Spinners/beaters are turning, but
material is not feeding Belt is slipping or has broken See belt maintenance section to
replace or repair
Belt drive chain has broken or
jumped off sprocket See chain maintenance section
Belts and spinners/beaters are
rotating in reverse Tractor hydraulic supply lines are
reversed Reverse lines on spreader
Hydraulic system doesn't have
enough power to operate Pump seals are worn;
obstruction in hydraulic lines,
etc. See hydraulic maintenance
section
Oil overheated
Tractor hydraulic oil level might
be too low Fill oil reservoir to proper level
Spinner attachment does not
spread evenly: Spreads more to
the outside and not enough in
center Move spinner attachment back 1
hole to attain desired spread
Spinner attachment does not
spread evenly: Spreads more in
the center not enough outside Move spinner attachment
forward 1 hole to attain desired
spread