PEQUEA SuperSpread PTO 135, Operator'S Manual, Page: 15 / 28

13
Adjustments Cont.
• Conveyor Row width adjustment on the conveyor attachment is accomplished by
loosening the row width gates, this is done by rotating lever A counter
clockwise, when facing the rear of the machine. Set tension of lever A so that
gates can be positioned conveniently. Lever A is then tightened to secure
positioning of row width gates.
With row width gates all aligned at the 5
o'clock positioning, the resulting row will
be approximately one foot wide and at
maximum depth. (See drawing #1)
With row width gates aligned from the 5 o'clock
position gradually opening to the 3:30 position,
row width will be approximately 3' wide, but less
concentrated. (See drawing #2)
Drawing #1 Drawing #2
Material
Flow
Conveyor
Attachment
Spreader
Material
Flow
Conveyor
Attachment
Spreader
Lever A
NOTE: An optional conveyor speed adjustment control can be installed for "in-tractor" convenience.