PEQUEA SuperSpread PTO 135, Operator'S Manual, Page: 16 / 28

14
• Spinners 1). Adjusting spinner speed causes spread width to increase or decrease.
2). Row width increases when control is moved clockwise and decreases when it
is moved counter-clockwise.
Additional Adjustment While the spinner attachment is preset at the factory for uniform spread across
the width of distribution, adjustment can be made to increase the amount of
material to the outer areas of the spread pattern or to the inner areas of the
spread pattern. Image 14-1 illustrates 4 adjustments in the spinner mounting
channel. Moving the spinners toward the back of the spreader will increase the
material in the inner area of the spread pattern, and moving the spinner forward
increases the amount of material in the outer area of the spread pattern.
Support spinner assembly channel on left and right of machine and remove
bolts at "A" and "B" on both sides. Move channel forward or back to make
appropriate adjustment. Replace bolts at "A" and "B" and tighten fully.
Adjustments Cont.
Figure 14-1
12-A
Some materials tend to bridge across the hopper impairing flow. An optional top beater can be installed near
the gate opening. Call your dealer for more information.
Optional Agitator Beater
Figure 14-2
A
B