PEQUEA SuperSpread PTO 135, Operator'S Manual, Page: 10 / 28

SuperSpread™ is designed to travel safely at highway speeds, unloaded (empty). Attempting to transport
spreaders that are loaded at highway speeds may cause damage to tires, bearings and may impair safe driving.
See imprint on the sidewall for allowable highway speed. Never transport equipment on public roads without
having safety chains installed and connected correctly to the towing vehicle.
Chain should be of sufficient length to permit full turning radius and crossed when hitched to towing vehicle. See
illustration below.
Check connection frequently on long trips.
8
NOTE: Transporting the machine with the rear section of the PTO assembly
dangling from the jack shaft may damage this part. The shield will be dented as a result
of bouncing against the hitch, by the drawbar or bumper when left dangling, and dirt and
grit from the road will accumulate on the critical internal sliding surfaces. Remove the
complete PTO assembly when towing the spreader with a truck.
Safety Chain
PTO Output Spline
Transporting
Operation Cont.