Pepwave MAX User Manual Download

Page: 88 / 121

http://www.pepwave.com

17 Miscellaneous Settings

The miscellaneous settings include configuration for PPTP Server, Service Forwarding, and Service
Passthrough.

17.1 PPTP Server

Pepwave MAX has a built-in PPTP Server, which enables remote computers to conveniently and securely
access the local network.

PPTP server setting is located at

Advanced > Misc. Settings > PPTP Server.

Simply check the box to enable the PPTP server function. All connected PPTP sessions are displayed on
the Client List at

Status > Client List

. Please refer to section 19.3 for details.

PPTP Server Setting

Listen On

This setting is for specifying the WAN connection(s) and IP address(es) where the PPTP

server should listen on.

User Accounts

This setting allows you to define the PPTP User Accounts. Click

Add

to input username

and password to create an account. After adding the user accounts, you can click on a

username to edit the account password. Click the button

to delete the account in its

corresponding row.

Summary of Contents for MAX















































































































Search results

Summary of Contents for MAX

Reviews:

Related manuals for MAX

Brands by name

Popular brands

Pepwave MAX, User Manual

Search results

Summary of Contents for MAX

Reviews:

Related manuals for MAX

Brands by name

Popular brands