Pepwave MAX, User Manual

Page: 15 / 121

http://www.pepwave.com 15 Copyright @ 2013 Pepwave
5 Installation
Connecting the Network with Pepwave MAX Mobile Router:
5.1 Preparation
Before installing Pepwave MAX Mobile Router, please prepare the following:

At least one Internet/WAN access account and/or Wi-Fi access information.

For each network connection,

Ethernet WAN : A 10/100/1000 BaseT UTP cable with RJ45 connector

USB : A USB modem

Embedded Modem : A SIM card for GSM/HSPA service

Wi-Fi WAN : Wi-Fi antennas

PC Card / Express Card WAN: A PC Card/Express Card for the corresponding card slot.

A computer with TCP/IP network protocol and a web browser installed. Supported browsers
include Microsoft Internet Explorer 8.0 or above, Mozilla Firefox 10.0 or above, Apple Safari 5.1
or above, and Google Chrome 18 or above.
5.2 Constructing the Network
At the high level, construct the network according to the following steps:
1. With an Ethernet cable, connect a computer to one of the LAN ports on the Pepwave MAX.
Repeat with different cables for up to 4 computers to be connected.
2. With another Ethernet cable or a USB modem / Wi-Fi antenna / PC Card / Express Card, connect
it to one of the WAN ports on the Pepwave MAX. Repeat the same procedure for other WAN
ports.
3. Connect the power adapter to the power connector on the rear panel of Pepwave MAX, and then
plug it into a power outlet.
The following figure schematically illustrates the configuration that results: